Sapphire heat exchanger design..

[Mike Pailliotet]

Fellow owners, you are aware that the Bimba valve will not engage if the system is not under load and running at 70% or more?

In other words let it RIP when you're prespraying oif you want mega heat for the first room...



If not a smaller 370 may never catch up if you're heavy on the trigger from the get go..

 

[Zee]

Well, the air-cooled ones should be running at nearly full throttle anyways for optimum cooling of the engine.

 

[Nomad74]

yes we know

That reminds me. I need to lube my Bimba.

 

[DAT]

What's a bimba?

 

[Sierra Clean Care]

I put my chems in my HF, get set up, and plug my vac hose, put the HF wand into the jug, and fill it up. By the time it’s full, my water is HOT.... I unplug the vac hose, and start to prespray. I’m at operating temp before I even start the first room.... LOVE the Cleanco....

 

[Sierra Clean Care]

What's a bimba?

Bambi’s older brother....

 

[bob vawter]

All you guys are nukin futs.....

 

[SamIam]

What's a bimba?

 

[SamIam]

Bypass cylinder = bimba

 

[SamIam]

Bimba needs at least 7 hg to move

 

[SamIam]

Fellow owners, you are aware that the Bimba valve will not engage if the system is not under load and running at 70% or more?

In other words let it RIP when you're prespraying oif you want mega heat for the first room...



If not a smaller 370 may never catch up if you're heavy on the trigger from the get go..

Cap off the in take and put it under load it will heat faster

 

[D Luke]

cough...Butler...cough

Pull up to a job, it's hot, mix up pre-spray, it's hot, apply pre-spray, it's hot...work a while, you guessed it, it's (too) hot.

I understand Direct Drives aren't for everybody, though.

 

[Nomad74]

Cap off the in take and put it under load it will heat faster

Did he really need to be told that?

 

[DAT]

Bambi’s older brother....

and whos the bimbo?

 

[Andy]

and whos the bimbo?

Their sister-in-law

 

[Doug Cox]

I start the machine when I arrive at the first job, turn on the pump, turn up the rpm's, cap off the vac port to open the diverter and then set up for job so its relatively hot when I start cleaning.

 

[SamIam]

I start the machine when I arrive at the first job, turn on the pump, turn up the rpm's, cap off the vac port to open the diverter and then set up for job so its relatively hot when I start cleaning.

Beast mode 570

 

[Mike Pailliotet]

I start the machine when I arrive at the first job, turn on the pump, turn up the rpm's, cap off the vac port to open the diverter and then set up for job so its relatively hot when I start cleaning.

When you first arive???

It would be running for an hour in most cases.

 

[jcooper]

When you first arive???
It would be running for an hour in most cases.

Mike,
Is that generally how long from pull up til pre spraying for you?

As someone(me) not carrying water - with the gift of gab, similar setups, no helper and cautious, wondering how long....



Ohhh, and yea. Lube the bimba...


You can also get cracks in the plastic tubes going to the bimba and blower(i believe) that can cause it not to get the 7hg it needs. That was a tuff and very frustrating one to figure out...

Screw driver as last resort...

 

[SamIam]

When you first arive???

It would be running for an hour in most cases.

We’re not all doing one job a day

 

[Nomad74]

My first job today took me 5 hours. It was a nightmare MacMansion. 40 year old carpet that hadn't been cleaned in over 10 years. The lady got mad at me when I refused to move her Piano and washer/dryer. It would have required me to unhook all the water lines, gas lines, and dryer vent lines. Screw that!!!!!! She ended up calling a friend to move the washer/dryer. The piano stayed in place. I think they both found out what a pain it was and in the process they scratched up the linoleum. I'm so glad I planted my feet and stood my ground. I usually fold.

 

[ruff]

My first job today took me 5 hours. It was a nightmare. ..
........

View attachment 82499

No need to say that Damon. Redundant.
Just say I did a job today, we'll assume, well....actually know the rest

 

[Nomad74]

No need to say that Damon. Redundant.
Just say I did a job today, we'll assume, well....actually know the rest

No, carpet cleaners are idiots.

 

[ruff]

No carpet cleaners are idiots.

 

[Mike Pailliotet]

Is that generally how long from pull up til pre spraying for you?

1st time customer?

Absolutely..

Chat, tour, vac/edge, tarps set up...

 

[Cleanworks]

No carpet cleaners are idiots.

Not according to Marty. Idiot

 

[Papa John]

My first job today took me 5 hours. It was a nightmare MacMansion. 40 year old carpet that hadn't been cleaned in over 10 years. The lady got mad at me when I refused to move her Piano and washer/dryer. It would have required me to unhook all the water lines, gas lines, and dryer vent lines. Screw that!!!!!! She ended up calling a friend to move the washer/dryer. The piano stayed in place. I think they both found out what a pain it was and in the process they scratched up the linoleum. I'm so glad I planted my feet and stood my ground. I usually fold.

View attachment 82499

Don't you have a 360i BH?- If not get one.
Or do you like doing it the difficult way?

 

[Nomad74]

Don't you have a 360i BH?- If not get one.
Or do you like doing it the difficult way?

1. Rotovac will never get a dollar out of me.
2. No need, Code Red and dev wand made mince meat out of it.
3. I have a Mytee Trex brush head if i really wanted to roto it.
4. Have an awesome day.

 

[jcooper]

jcooper said: ↑
Is that generally how long from pull up til pre spraying for you?
1st time customer?
Absolutely..
Chat, tour, vac/edge, tarps set up...

Thank goodness...

 

[Desk Jockey]

Hell, If it were me I'd tell you to get to cleaning. You're the carpet cleaner, I don't need you for a friend!

Fookin service people that want to buddy up, creep me out. Do your job...do it well...and stay the fook away from me.